SG 146/24
ASTM has published a new consumer safety specification for nursing pillows, designated ASTM F3669-24.
In September 2024, ASTM International published a new standard consumer safety specification for nursing pillows with the designation ASTM F3669-24. The standard addresses the hazards identified by the US Consumer Product Safety Commission (CPSC), which included falls, suffocation and positional asphyxiation.
The standard defines nursing pillows as, “a product intended, marketed, or designed to position and support an infant close to a caregiver’s body while nursing or bottle feeding”. These products are usually stuffed, filled or molded foam, U-shaped in appearance, and generally rest upon, wrap around or are worn by a caregiver in a seated or reclined position.
Provisions in the standard include:
- Lead in paint
- Small parts
- Hazardous sharp edges or points
- Toys accessories
- Removal of components
- Permanency of labels and warnings
- Infant restraint system
- Infant support surface firmness
- Inner wall firmness
- Infant containment
- Seam strength
- Caregiver attachment strength
- Marking and labeling
- Instructional literature
The standard was developed by the ASTM Highchairs and Hook-On Chairs Subcommittee (F15.16) and approved on September 1, 2024.
A copy of the standard can be purchased at Standard Consumer Safety Specification for Nursing Pillows
Childcare equipment and children’s furniture must meet strict safety, quality and performance requirements. With a global network of experts and laboratories, SGS can address the testing, inspection, risk assessment and technical documentation requirements for products, as well as conduct factory and social audits to ensure your supply chain is compliant too. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.
© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.
