SG 115/24
Australia publishes mandatory Consumer Goods (Bicycle Helmets) Safety Standard 2024 to adopt six international standards for ensuring rider safety through safe helmets.
The mandatory Australian standard for bicycle helmets, Consumer Goods (Bicycle Helmets) Safety Standard 2024, was updated on March 22, 2024.
Scope
This mandatory standard applies to bicycle helmets which offer protection to a cyclist’s head during impact.
It does not apply to:
- Helmets used for downhill mountain bicycle racing
- Helmets used for BMX bicycle competitive racing
- Toy helmets
- Motorcycle helmets
- Helmets only for use with other wheeled recreational devices which are not bicycles (for example, a helmet only for use when skateboarding and is not marked as, or intended, to be worn when cycling)
Compliance
The Consumer Goods (Bicycle Helmets) Safety Standard 2024 sets out the mandatory standard requirements for bicycle helmets.
Bicycle helmet manufacturers any one of the following six standards to show compliance:
- Australian Standard AS/NZS 2063:2020 – Helmets for use on bicycles and wheeled recreational devices
- Australian Standard AS/NZS 2063:2008 – Bicycle Helmets
- European standard EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates
- US Consumer Product Safety Commission standard US CPSC 16 C.F.R. Part 1203 Safety Standard for Bicycle Helmets
- American Society for Testing and Materials (ASTM) International standard F1447-18 Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
- Snell standard B-95 1995 Bicycle Helmet Standard, 1998 revision, Standard for Protective Headgear for Use in Bicycling
Transition period
This mandatory standard gives suppliers a transition period to adjust to the new requirements.
Up to September 21, 2025, suppliers must comply with either:
- Trade Practices (Consumer Product Safety Standard) (Bicycle Helmets) Regulations 2001, or
- Consumer Goods (Bicycle Helmets) Safety Standard 2024
From September 22, 2025, suppliers must comply with:
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.
© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.
79 D, Bo Chein Street,
6 ½ Mile, Hlaing Township, P.O. Box 975, 11051,
Yangon,
Myanmar