Contact

What are you looking for?

China Issues Product Standard for Footwear Used by Older People - GB/T 43587-2023

SafeGuardSSoftlinesMarch 12, 2024

SG 47/24

GB/T 43587-2023 ‘Footwear for older people’ was released on December 28, 2023, and will be officially implemented on July 1, 2024

On December 28, 2023, the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China (PRC) issued product standard GB/T 43587-2023 for ’Footwear for Older People,’ which will become effective on July 1, 2024. GB/T 43587-2023 is the first edition of this standard. It applies to footwear, including boots, intended for general use by older individuals.

Main technical requirements of GB/T 43587-2023 ‘Footwear for older people’

No.ItemTest methodRequirement
Superior LevelQualified Level
1.LabellingQB/T 2673Comply with QB/T 2673
2.Appearance qualityGB/T 3903.5Comply with GB/T 43587-2023,4.3
3.Effective heel heightGB/T 43587-2023, 5.3≤25 mm
4.Peeling strengthGB/T 3903.3Sidewall to upper ≥90 N/cmSidewall to upper ≥70 N/cm
Upper to sole ≥60 N/cmUpper to sole ≥45 N/cm
If the material is torn and the upper to sole junction is still bonded during the test, and the peeling strength is ≥30 N/cm, judge it as qualified
5.Flexing resistance of whole shoesGB/T 3903.1
  • After flexing, there should be no cracks, delamination, or damage on the upper
  • The length of debonding at the sidewall, upper to sole, or sole shall not exceed 5.0 mm
  • There should be no cracks or paint peel-off on the outsole
  • There should be no air or liquid leakage or shrinkage if assembled with an air or liquid cushion
  • After flexing, there should be no cracks, delamination, or damage on the upper
  • The length of debonding at the sidewall, upper to sole, or sole shall not exceed 5.0 mm
  • There should be no more than 3 cracks on outsole and individual crack length shall not exceed 5.0 mm
  • There should be no paint peel-off on the outsole
  • There should be no air or liquid leakage or shrinkage if assembled with an air or liquid cushion
6.Outsole abrasion resistanceGB/T 3903.2Solid materials ≤10.0 mmSolid materials ≤12.0 mm
Cellular materials ≤10.0 mmCellular materials ≤14.0 mm
7.Outsole and midsole adhesion strengthGB/T 21396≥30 N/cm≥20 N/cm
If cellular materials are torn and the outsole and midsole are still bonding, and the adhesion strength is ≥15N/cm, judge it as qualified
8.Color fastness to rubbing of lining and insockQB/T 2882-2023, Method A≥3 Grade≥2-3 Grade
9.Compression deformation of cellular soleHG/T 2876≤35%
10.Slip resistanceGB/T 3903.6Wet dynamic ≥0.40Wet dynamic ≥0.30
11.Fatigue resistance of touch and close fastenersGB/T 3903.20The peel strength after 3000 times ≥0.08 N/mm
GB/T 3903.21The shear strength after 3000 times ≥7.0 N/cm2
12.Outsole hardnessGB/T 3903.4Solid materials: 45~65 Shore A
Cellular materials: 40~60 Shore C
13.Cold insulation (If claimed)GB/T 21284≤10℃
14.Low-temperature flexing resistance of upper materials (If claimed)QB/T 2224After 60,000 flexing cycles under (-10±2) °C, the upper materials shall not have any visible cracks (including cracking or crack grain)After 30,000 flexing cycles under (-10±2) °C, the upper materials shall not have any visible cracks (including cracking or crack grain)
15.Shock absorption performance (If claimed)GB/T 30907The G value of the heel ≤20
16.Antibacterial property (If claimed)QB/T 2881Antibacterial rate for linings/insocksKlebsiella pneumoniaeStaphylococcus aureusCandida albicans
before washing≥95%≥95%≥80%
after washing for 10 times≥85%≥85%≥70%
17.OdorGB/T 43587-2023, 5.17≤3 Grade

Details of the Technical Content

For more information, please refer to the standard GB/T 43587-2023 ‘Footwear for older people’ or contact SGS directly.

From a product safety and quality perspective we conduct tests to verify that products meet the desired global requirements and standards, for example: volatile organic compounds (VOCs) in adhesives, excessive chromium VI in leather and the risk of phthalates in plastic accessories associated with children’s footwear. With a global network of consumer product experts and testing facilities, we are the ideal partner to support your leather and footwear business needs. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.

© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.

For further information, please contact:

Min Zhu

Dr. Min Zhu

Consumer and Retail — Softlines
US & Canada Softlines Business Head

Stay on top of regulatory changes within your industry

Digital cart concept

Related Links

News & Insights

  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152,

1211, Geneva, Switzerland