SG 134/24
US Consumer Product Safety Commission (CPSC) has published a notice of proposed rulemaking to revise the existing consumer product safety rule for toys to add performance and labelling requirements for battery-operated toys containing button cell or cell batteries.
On August 13, 2024, the CPSC published a notice of proposed rulemaking (16 CFR 1250) to revise the existing safety standard for toys. The proposed rule will add performance and labeling requirements for battery-operated toys containing button cell or cell batteries to address the risk of death or injury associated with ingestion of these batteries by children.
In 2023, ASTM F963 was updated to improve the battery accessibility of toys that contain button cell or coin cell batteries by requiring such toys to undergo use and abuse testing. However, according to CPSC staff, ASTM F963-23 still does not address all the identified hazards and the requirements are not as stringent as the requirements for non-toy consumer products in 16 CFR 1263.
The proposed rule would add a new section in 16 CFR 1250 that will include the following requirements that are consistent with 16 CFR 1263 and IEC 62115 (Electronic Toys – Safety):
- Captive fasteners requirement
- Minimum battery compartment threaded attachment requirements
- Sequential use and abuse test requirements
- Stress relief test
- Battery replacement test
- Drop test and tip over test
- Impact test
- Crush test
- Torque, tension and compression tests
- Compliance verification test - 16 CFR 1263.3 packaging, markings, product markings and general instructions requirements
16 CFR 1112 is also proposed to be updated to include toys containing button cell or cell batteries in the CPSC’s list of notice of requirements (NORs).
CPSC is proposing an effective date of 180 days after publication of the final rule in the Federal Register. Interested parties are invited to submit their comments by November 14, 2024.
To learn more on the notice of Proposed Rule 16 CFR 1250 click here.
Optimize your potential, reach new markets and streamline every step of the toy life cycle while also reducing the risk of non-compliances, recalls and delays with our one-stop-shop solution for compliance with toy safety requirements. Let our global network of experts, laboratories and accreditations help you access the world’s toy markets effectively and efficiently. Contact us to know more or visit our website. In the end, it’s only trusted because it’s tested.
© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.
