SG 153/24
US Consumer Products Safety Commission (CPSC) has published a direct final rule to incorporate the latest version of the ASTM standard (ASTM F1967-24) for infant bath seats.
On October 9, 2024, the CPSC published a direct final rule to update 16 CFR 1215, safety standard for infant seats. The rule incorporates the latest version ASTM F1967-24 (Standard Consumer Safety Specification for Infant Bath Seats) with no modifications. It will become effective on January 4, 2025, provided the CPSC does not receive significant adverse comments by November 8, 2024.
The standard defines infant bath seats as, “an article that is used in a bathtub, sink or similar bathing enclosure and that provides support, at a minimum, to the front and back of a seated infant during bathing by a caregiver. This does not include products that are designed or intended to retain water for bathing.”
The revised standard includes the following changes:
- Clarifies that bath seats intended to contact the bottom surface of the bathtub must be tested on both test surface #1 and test surface #2
- Requires the test platform to be used in stability testing is ‘alcove-style’
A read-only copy of the standard is available in the ASTM reading room.
Final rule 16 CFR 1215: Safety Standard for Infant Bath Seats
Childcare equipment and children’s furniture must meet strict safety, quality and performance requirements. With a global network of experts and laboratories, SGS can address the testing, inspection, risk assessment and technical documentation requirements for products, as well as conduct factory and social audits to ensure your supply chain is compliant too. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.
© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.
